Incab Europe cables are rigid yet flexible enough to be installed into tubes and include many options for installation by blowing.
Fibre optic cables include dielectric and metallic cables for ducts and utility tunnels.
Fibre optic cables designed for high reliability in harsh environment.
Robust designs applied in the sea between land-based stations to carry telecommunication signals.
Aerial cables are designed for installation on distribution and transmission lines.
Applied inside buildings (including vertical runs), in trays, channels, on outer sides of buildings, as well as in ducts, tubes and blocks. Suitable for blowing-in into protecting polyethylene tubes.
Designed for aerial installation on transmission towers, lamp posts, between buildings and structures.
Applied in the construction of fibre-optic link on overhead transmission lines of 35 kV and more.
Used for stationary installation when the optical fibre needs extra protection from mechanical damages.
Central strength member (FRP rod)
Gel-filled loose tube
Up to 288 fibers
Installation tension up to 1 kN
Easy to install
|Outer jacket||PA (polyamide)|
|Fiber type||G.657.A1 (200 μm)|
|Fiber count, up to||144||192|
|Number of loose tubes||6||8|
|Number of fillers||-||-|
|Fibers per loose tube||24|
|Cable diameter, mm||5.5||6.6|
|Cable weight, kg/km||20.0||27.3|
|Operation tension, kN||0.30||0.30|
|Installation tension, kN||1.00||1.00|
|Operating temperature||-40°C ... +70°C|
|Installation temperature||-30°C ... +50°C|
|Operating temperature||-50°C ... +70°C|
|Minimum bending radius||15 x cable diameter|
|Design life||25 years|
More details in datasheets
Have a question?
Send a request
Describe your requirements to blowing cable
and we'll offer the best design
Reel Capacity Calculator
Calculate the maximum reel length and total weight of reel with cable
Truck Load Calculator
How many reels can be placed on a truck? Plan logistics efficiently